Netgear EAX11 Setup | AX1600

The dual-band WiFi 6 mesh Netgear EAX11 Setup has a 1.6 Gbps internet speed. You can expand your current wireless network throughout your house by setting up a Netgear EAX11. Additionally, setting up a Netgear EAX11 extender gives you access to 4 WiFi 6 streams. As a result, you may take advantage of seamless mesh internet connection all over your house.

Netgear EAX11 Extender Setup-Manual Guide

1. Connect the Netgear EAX11 Extender plug.
2.  Use your device to connect to the WiFi network of the extender.
3. Open the address bar of a web browser and type mywifiext.net.
4. To configure the extender, according to the on-screen directions.
5. Enter the password for the WiFi network you are currently using after selecting it.
6. Wait for the WiFi network connection from the extender.
7. After connecting, move the extender to a good spot to get the best coverage.

Netgear EAX11 AX1600 Extender Setup-WPS Guide

1. When the Power LED on the Netgear EAX11 Extender is solid green, plug it in.
2. Once the WPS LED on the extender is starting to blink, press the WPS button on it.
3. Click your WPS button for two minutes.
4. Hold off until the extender’s WPS LED solid green, showing a successful connection, turns on.
5. After connecting, move the extender to a good spot to get the best coverage.
6. Link your devices to the WiFi network that is extended.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is Mywifiext.

Netgear EAX11 Wifi Range Extender-Login Steps

1. Connect your mobile device to the Netgear EAX11 Extender’s WiFi connection.
2. Start a web browser and input mywifiext.net setup into the address box.
3. Put your password and username in here.
4. Just click “Log In” or hit “Enter.”
5. To manage your extender or adjust its settings, follow the directions displayed on the screen.
6. After that, you may use the dashboard to monitor your network, improve firmware, and change the WiFi settings.

Netgear EAX11 Wifi Range Extender-Firmware Update

1. Link your gadget to the WiFi network of the Netgear EAX11 Extender.
2. Start a browser, then type mywifiext.net.
3. Enter your password and username to log in.
4. Choose Firmware Update from the Settings and Administration menu.
5. The most recent firmware can be downloaded and installed by following the on-screen directions.

Netgear EAX11 AX1600 Extender-Reset Process

1. Find the Netgear EAX11 Extender’s reset button.
2. Using a paperclip or other such item, press and hold the reset button for approximately ten seconds.
3. Release the reset button when the power LED starts to blink.
4. Wait for the restart and factory reset of the extender.
5. Change the extender’s settings as required.