The Netgear extender not connecting to client device issue has been snatching the living daylights of many users. This issue has stopped them from accessing mywifiext.net. In case you are amongst them, then it is a great thing that you have come to this article as here we have mentioned the troubleshooting tips through which you will be able to resolve this issue and make your devices join once again.
How to Connect Netgear Extender to Client Device?
1st Solution: Enter the Right Network Password
In case you have used a wireless source of connection to connect the devices, then you might be experiencing the Netgear extender not connecting to client device issue because you have entered the wrong network key or WiFi password. Why? Here are some reasons:
-
You committed typing errors in the entrée.
-
The Caps Lock key was left enabled while you were entering the password.
-
You tried to access the wrong network using the password of your network.
Regardless of the reason, it is recommended that you enter the correct password. The same can be done if you do the opposite of the things mentioned above. This means that there should be no typing errors; the Caps Lock key should be disabled, and so on.
2nd Solution: Replace the Damaged Ethernet Cable
In case you have used an Ethernet cable for the establishment of the connection between the Netgear range extender and the client device, then it is probably damaged. Or else, you would not be facing the Netgear extender not connecting to client device issue. So:
-
Make sure that the Ethernet cable has no cuts on or in it.
-
It should not be worn out or old.
-
The cable ought to be tightly plugged into the ports of the networking devices.
After taking care of these points, see in case the Netgear extender not connecting to client device issue has hopped off of your back. In case you are still facing it, then you may continue reading this article and learn about more ways to fix it.
3rd Solution: Relocate the Client Device in Use
Given that you are still a victim of the Netgear extender not connecting to client device issue, it could be because your wireless range extender is kept near electronic devices, transmitting appliances, and metal objects.
-
Keep the extender away from aluminum studs, cordless phones, and treadmills.
-
Also, do not keep it near surfaces like mirrors, glasses, and fish tanks.
-
At last, avoid keeping it in corners or near thick concrete walls.
We are indirectly suggesting you relocate your networking device so that you can protect its signals from getting interrupted or blocked any further than they already have. Let us hope that it worked for you; in case it did not, then you already know what to do.
4th Solution: Power Cycle the Netgear Extender
Technical glitches are also one of the many reasons why users experience technical issues like the Netgear extender not connecting to client device issue. Chances are that you are all messed up in the head because of the same reason.
-
In this case, restart your extender by turning off the extender.
-
Unplugging the extender is required next.
-
Count from one to ten or read the alphabet backward.
Once done, do the opposite of the first two steps. Wait for the LED light to turn green. It is recommended that you reboot your networking device from scratch in case the LED light named power on the extender does not turn green.
Verdict
This ends the troubleshooting guide written on how to resolve the Netgear extender not connecting to device issue with ease. In case despite following all the solutions mentioned above, you are still going bonkers because of the issue at hand, then do not think twice before putting the reset process to use. Now the question that might be clouding your head might be how to reset Netgear extender? Well, it is quite simple.
We will tell you about two platforms from where you can learn how to do so. You can either refer to the user manual of your networking device or make your way to the official website of the Netgear wireless extender.